Full Product Catalogue

A solvent free, low odour acrylic primer for interior use to aid adhesion on all absorbent and non absorbent surfaces.

Fast setting light – coloured fine mortar for repairs and finishing of concrete and renders.

A medium strength (40 MPa), shrinkage-compensated, fibre reinforced, thixotropic mortar for concrete – class R3.

A sulphate resistant, fibre reinforced shrinkage compensated thixotropic mortar for the repair of concrete – class R4.

One component corrosion-inhibiting cement for the protection of reinforcing rods.

A two-component multi-purpose neutral-coloured epoxy formulate in water dispersion to create vapour-permeable coatings on industrial floors.

Protects the surface of concrete floors or walls against capillary penetration of water.

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.

A silicon resin based primer in water dispersion to be used to regulate the absorption of the substrate before applying Silancolor Paint.

A rapid-setting fibre-reinforced structural cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete...

Two-component water-based epoxy coating with a shiny finish, for concrete floors and cementitious substrates, to provide an anti-dust, oil resistant f...

A ready to use, UV resistant, long-lasting, acrylic paint for internal and external use.

Two- component, transparent epoxy impregnator for water dispersion.

Recommended for protecting marble, granite or natural stone facings against graffiti drawn with spray-paint, crayons, markers, etc.

Recommended for all surfaces not previously treated with graffiti-repellent protection against conventional spray-paints.

Acrylic resin undercoat in water dispersion to even out the absorption of substrates before applying other products.

A solvent-based fixing primer with high penetration properties for porous substrates and curing agent for repair mortars.

An easy to use general purpose bitumen waterproofing emulsion for cold waterproofing masonry and concrete vertical and sloping surfaces.

A single pack, solvent free, moisture curing, rapid drying polyurethane membrane, with low VOC's, for waterproofing cementitious screeds.

Two-component, rapid drying elastic cementitious mortar for waterproofing terraces and balconies, even at at low temperature.

Two-component solvent free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.

An easy to apply on suitably prepared masonry substrates general purpose render for internal and external use.

A flowable, quick setting cementitious mortar suitable for application down to temperatures as low as -5°C.

A general purpose non-shrink grout.

A filling and evening layer for covering small imperfections in cementitious surfaces before applying a finish coat from the Mapei Silancolor range.

An odourless water solution cleaning product for the hygiene of walls.

R2-class, rapid-setting shrinkage compensated thixotropic, fibre-reinforced, cementitious mortar. Apply in a single layer from 3 to 40mm thick.

2 pack fillerized epoxy primer. For use prior to a range of 1 or 2 pack floor paints or epoxy / PU resin systems.