Full Product Catalogue

Protects the surface of concrete floors or walls against capillary penetration of water.

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.

R2-class, rapid-setting shrinkage compensated thixotropic, fibre-reinforced, cementitious mortar. Apply in a single layer from 3 to 40mm thick.

2 pack fillerized epoxy primer. For use prior to a range of 1 or 2 pack floor paints or epoxy / PU resin systems.

A high grab, ready-to-use, non-slip paste adhesive for ceramic tiles. For use on interior walls. Ideal for tiling on to plaster and plaster board.

A 2 pack epoxy resin based binder, used as a fixing primer or adhesion promoter, or as a binder when mixing resin mortar with consistency similar to a...

Quick-setting, fibre-reinforced cementitious mortar for internal and external floors and walls. Apply from 3 to 30mm.

A medium strength (40 MPa), shrinkage-compensated, fibre reinforced, thixotropic mortar for concrete – class R3.

A sulphate resistant, fibre reinforced shrinkage compensated thixotropic mortar for the repair of concrete – class R4.

One component corrosion-inhibiting cement for the protection of reinforcing rods.

A two-component multi-purpose neutral-coloured epoxy formulate in water dispersion to create vapour-permeable coatings on industrial floors.

A rapid-setting fibre-reinforced structural cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete...

Water repellent cementitious skimming mortar with fine, natural finish. For concrete, plastic, glass and porcelain coatings.

A silicon resin based primer in water dispersion to be used to regulate the absorption of the substrate before applying Silancolor Paint.

A protective acrylic waterproof coat. For surfaces which are in permanent contact with water, inc flat roofs and water tanks.

Used to protect the surfaces of concrete and cement renders from aggressive agents present in the atmosphere.

A silicone resin based, breathable paint. Has the advantages of traditional mineral based paints and synthetic paints.

A ready to use, UV resistant, long-lasting, acrylic paint for internal and external use.

Silicate based, vapour-permeable Mineral Silicate Masonry Paint for cement or lime based renders.

A silane and siloxane based primer to even out absorption of substrates. For overcoating with the Silancolor Plus range.

A high white, internal washable water-based wall paint, formulated to have low dirt retention.

Acrylic paint with micro quartz for internal and external application with a smooth finish and high durability.

A semi-transparent clear or tinted anti-carbonation stain.

A siloxane paint for the mould and fungi resistant protection of both internal and external walls.

A base coat formulated to even out surfaces by filling defeats on old render prior to Mapei Silexcolor Top Coat.

A durable, highly washable, semi gloss enamel paint for the decoration of interior walls and ceilings in healthcare facilities.

A flexible fibroreinforced, acrylic rustic effect plaster for internal and external application to protect walls and even out surface imperfections.