Full Product Catalogue

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.

Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.

A two component chemically curing epoxy coating that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and ba...

Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating with a selected blend of fused aluminium oxide.

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

For use with Jotamastic, Penguard, Jotacote Universal and Barrier range of paints.

A solvent based thinner for acrylic and chlorinated rubber paints and anti-fouling compositions.

Designed to improve the flow and solvent evaporation of Jotun polysiloxanes and cross linked acrylics.

A solvent for the following Jotun paints Hardtop AS, Hardtop XP, Hardtop Flexi Hardtop HB Hardtop XA.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A one component physically drying acrylic, high build, fast drying coating with a matt finish for application direct to metal.

A single component waterborne acrylic thin film intumescent coating for use to provide fire protection of structural steel exposed to cellluosic fire ...

A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.