£7.75 delivery on orders excluding certain products & postcodes *
For use with Jotamastic, Penguard, Jotacote Universal and Barrier range of paints.
A solvent based thinner for acrylic and chlorinated rubber paints and anti-fouling compositions.
Designed to improve the flow and solvent evaporation of Jotun polysiloxanes and cross linked acrylics.
A solvent for the following Jotun paints Hardtop AS, Hardtop XP, Hardtop Flexi Hardtop HB Hardtop XA.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A one component physically drying acrylic, high build, fast drying coating with a matt finish for application direct to metal.
A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.
A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.
A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.
A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.
A single pack, water borne acrylic emulsion topcoat for use over Jotun intumescent systems.
A single component, fast drying, glossy alkyd touch dry in 20 minutes for garages, workshops or light use areas.
A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....
A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
An easy to use one component alkyd primer featuring good adhesion properties and surface tolerance.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item No.169.
For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.
A single component oxidatively drying alkyd coating for engines, topside, deck and superstructure.
A one part oxidatively drying alkyd coating, that is a fast drying, high build, zinc phosphate pigmented primer or mid coat in atmospheric environment...
An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.
Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.
A general purpose thinner for most conventional Jotun alkyd or oil based paints.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.