Full Product Catalogue

For use with Jotamastic, Penguard, Jotacote Universal and Barrier range of paints.

A solvent based thinner for acrylic and chlorinated rubber paints and anti-fouling compositions.

Designed to improve the flow and solvent evaporation of Jotun polysiloxanes and cross linked acrylics.

A solvent for the following Jotun paints Hardtop AS, Hardtop XP, Hardtop Flexi Hardtop HB Hardtop XA.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.

A single pack, water borne acrylic emulsion topcoat for use over Jotun intumescent systems.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A general purpose thinner designed to improve the flow of Jotun Tankguard paints.

A general purpose solvent based thinner designed to improve the flow of Jotun inorganic zinc ethyl silicate products.

A two component transparent polyamide cured high molecular weight epoxy sealer coating for concrete.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

A single component, fast drying, glossy alkyd touch dry in 20 minutes for garages, workshops or light use areas.

A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....

An easy to use one component alkyd primer featuring good adhesion properties and surface tolerance.

A single component oxidatively drying alkyd coating for engines, topside, deck and superstructure.

An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.

Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

A general purpose thinner for most conventional Jotun alkyd or oil based paints.

A two component coating for use in atmospheric and immersed environments.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168

A one component waterborne acrylic thin film 90 minute intumescent coating.

A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.