£9.95 delivery on orders excluding certain products & postcodes *
For use with Jotamastic, Penguard, Jotacote Universal and Barrier range of paints.
A solvent based thinner for acrylic and chlorinated rubber paints and anti-fouling compositions.
Designed to improve the flow and solvent evaporation of Jotun polysiloxanes and cross linked acrylics.
A solvent for the following Jotun paints Hardtop AS, Hardtop XP, Hardtop Flexi Hardtop HB Hardtop XA.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.
A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.
A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.
A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.
A single pack, water borne acrylic emulsion topcoat for use over Jotun intumescent systems.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.
A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.
A general purpose thinner designed to improve the flow of Jotun Tankguard paints.
A general purpose solvent based thinner designed to improve the flow of Jotun inorganic zinc ethyl silicate products.
A quick drying single pack acrylic resin based topcoat for use as a finishing coat for application to either steel or concrete substrates.
A two component transparent polyamide cured high molecular weight epoxy sealer coating for concrete.
A paint thinner designed to improve the flow of Jotun paints inorganic zinc ethyl silicates being applied at high temperatures.
A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.
Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.
A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.
Very good fouling coating that assures a totally active surface continuously renewed providing a clean hull for the whole season.
A single component, fast drying, glossy alkyd touch dry in 20 minutes for garages, workshops or light use areas.
A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....
A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.