Full Product Catalogue

A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating with a selected blend of fused aluminium oxide.

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

For use with Jotamastic, Penguard, Jotacote Universal and Barrier range of paints.

A solvent based thinner for acrylic and chlorinated rubber paints and anti-fouling compositions.

Designed to improve the flow and solvent evaporation of Jotun polysiloxanes and cross linked acrylics.

A solvent for the following Jotun paints Hardtop AS, Hardtop XP, Hardtop Flexi Hardtop HB Hardtop XA.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A one component physically drying acrylic, high build, fast drying coating with a matt finish for application direct to metal.

A single component waterborne acrylic thin film intumescent coating for use to provide fire protection of structural steel exposed to cellluosic fire ...

A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.

A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.

A two pack polyamine cured phenolic / novolac epoxy coating that is specially formulated for tank lining.

A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.

A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.

A two component surface tolerant, high solids, high build coating. NORSOK approved.

A single pack, water borne acrylic emulsion topcoat for use over Jotun intumescent systems.

A low gloss polyurethane topcoat for atmospheric environments.