£7.75 delivery on orders excluding certain products & postcodes *
A single component, solvent based thin film intumescent coating for fire protection of structural steelwork for up to 120 minutes.
A two component, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.
A two-component, solvent-free, amine-cured modified phenolic epoxy tank coating suitable for aviation fuel.
A two component, high build, amine adduct-cured novolac phenolic epoxy coating for offshore, marine and chemical / petrochemical sectors.
A two component, high build, amine adduct-cured novolac phenolic epoxy primer for subsequent coats of PPG Phenguard Subsea 780.
A two component high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.
A two component, high build polyamide cured epoxy primer coating for application down to -5°C.
A two component, solvent free amine cured epoxy coating. Suitable as a tank coating for crude oil and aliphatic petroleum products.
Produced in 0.2 - 0.4mm grade to offer non-slip properties to many floor paints.
A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.
A two component solvent free amine cured phenolic epoxy coating for pipe externals.
A 2 part, moisture curing, waterborne, low zinc silicate, prefabrication primer suitable for immediate application on shot blasted steel plates.
A two-component, tough and abrasion resistant aliphatic clear acrylic polyurethane gloss finish.
A two component, high build, amine adduct cured, phenolic epoxy holding primer.
Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.
A two component polyamide cured waterborne epoxy primer which is particularly suitable when solvents are not permitted, for health and safety reasons....
A heat resistant modified alkyd product that produces an aluminium finish, ideal for use on a variety of metal substrates exposed to a high level of h...
Formally Amercoat 891. Heat resistant silicone/acrylic finish - heat resistant up to 350°C.
A two component moisture curing, low zinc, silicate prefabrication primer, suitable for application on shot blasted steel plates.
A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.
Moisture and surface tolerant coating with adhesive and non-skid properties and is suitable for concrete, steel and damp surfaces.
A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.
Sigma AquaCover 400 two component polyamine cured water borne epoxy coating for steel and concrete.
Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.
A two component, polyamide cured, epoxy primer that can be used as a general purpose epoxy primer, ideal for use on steel and non ferrous metals.
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.