Full Product Catalogue

Used with certain Carboline and Nullifire coatings to thin paint or clean tools as required.

Used with certain Carboline coatings to thin paint or clean tools as required.

Used with certain Carboline coatings to thin paint or clean tools as required.

Used with certain Carboline coatings to thin paint or clean tools as required.

Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

A fast drying, single pack modified alkyd primer for structural steel in a Carboline / Nullifire intumescent paint system.

An economical corrosion resistant primer for use on abrasive blasted steel as part of a Carboline/Nullifire intumescent system.

A thin film, high gloss finish with exceptional weathering performance characteristics.

An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.

A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

A high solids epoxy tank lining with exceptional chemical resistance. Formulated primarily as a tank lining.

Provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.

Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.

An extreme performance pipeline coating for hot, cryogenic and cycling exposures.

A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.

A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

A single pack medium to high temperature coating that withstands continuous temperature up to 400ºC, and peaks up to 540°C.

An aliphatic polyurethane, weather resistant topcoat repair for use on wind turbine blades.

A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.

A two pack, high solid aluminium pigmented, low temperature curing modified epoxy mastic.

A cleaning agent used for degreasing and cleaning contaminated surfaces prior to painting with Carboline coatings.

A high performance 2 pack epoxy for industrial use. Suitable for CUI. Low temperature curing down to -6°C.

An advanced isocyanate free topcoat with outstanding high gloss and colour retention for exterior exposures.