Full Product Catalogue

Quick-drying adhesion primer for priming and undercoating new and previously painted surfaces.

Single Pack Primer for Steel, Aluminium and Zinc surfaces.

A fast drying gloss topcoat for use on steel structures.

A Two-Component Aluminium Maintenance Paint For Use on Steel.

Fast thinner for alkyd paints, chlorinated rubber paints, and silicone aluminium paints.

A quick drying topcoat for steel, with excellent colour retention.

A quick-drying alkyd primer containing zinc phosphate. Ideal for the protection of steel.

A fast acting, self neutralising, paint remover with a non drip consistency.

A ready to use product that will instantly weatherproof exposed surfaces with just one coat.

Varnish spray for added protection of Ampere Traffic Paint.

Perfect for use in basements and interior walls suffering from damp.

Protects and decorates new or old concrete, block paving or recently cleaned paving.

A solvent based, single pack primer for use on porous substrates and metals.

A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A solvent based semi-gloss internal floor coating which is resistant to mild chemicals, water, oil and grease.

A lead free universal rapid drying road marking paint suitable for application to asphalt, concrete and brick with good skid resistance.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

A two component transparent polyamide cured high molecular weight epoxy sealer coating for concrete.

Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.

A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...

Solvent based primer on a siloxane base with a hydro­phobizing effect.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

For use on a wide variety of substrates including hand prepared rusty steel.

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

A solvent based alkyd transparent wood stain for outdoor use.

A single pack, solvent based special varnish suitable for interior and exterior woodwork.