£7.75 delivery on orders excluding certain products & postcodes *
A polyester fleece used as reinforcement with Sikalastic Liquid Applied Membrane systems.
A solvent based semi-gloss internal floor coating which is resistant to mild chemicals, water, oil and grease.
A lead free universal rapid drying road marking paint suitable for application to asphalt, concrete and brick with good skid resistance.
A silica quartz based additive powder to give smooth floor paints a tough and durable slip resistant performance to Johnstones Floor Paints.
A pre-treatment for galvanised steel which converts the surface nature to ensure the subsequent adhesion of a wide range of Johnstone's coatings.
A premium quality, solvent-based masonry paint formulated for exterior use on cement rendering, rough cast, brick and concrete.
A single component, solvent based thin film intumescent coating for fire protection of structural steelwork for up to 120 minutes.
A two component, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.
A two-component, solvent-free, amine-cured modified phenolic epoxy tank coating suitable for aviation fuel.
A two component, high build, amine adduct-cured novolac phenolic epoxy coating for offshore, marine and chemical / petrochemical sectors.
A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.
Perfect for areas that need a non slip surface that is barefoot friendly.
A general purpose thinner designed to improve the flow of Jotun Tankguard paints.
A general purpose solvent based thinner designed to improve the flow of Jotun inorganic zinc ethyl silicate products.
Formerly Sikafloor 326. A two part solvent free, coloured self-smoothing PUR floor resin, with tough-elastic properties.
A quick drying single pack acrylic resin based topcoat for use as a finishing coat for application to either steel or concrete substrates.
A two component transparent polyamide cured high molecular weight epoxy sealer coating for concrete.
Specifically developed line marking paint as a fast drying line marking coating for concrete surfaces with minimum disruption.
A two component, high build, amine adduct-cured novolac phenolic epoxy primer for subsequent coats of PPG Phenguard Subsea 780.
A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.
A synthetic-resin-based primer which ensures perfect bonding with smoothing and levelling compounds and cementitious mortars on non-absorbent and diff...
A paint thinner designed to improve the flow of Jotun paints inorganic zinc ethyl silicates being applied at high temperatures.
A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.
A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A two component water borne epoxy coating for corrosion protection. Designed for where short dry to handle and over coating times are required.
A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.