£9.95 delivery on orders excluding certain products & postcodes *
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.
A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.
A white spirit based, single pack quick drying primer for the protection of metal against corrosion.
Zinga 500ml 96% Zinc aerosol with all the protection of Zinga 96% Zinc Cathodic Protection.
Anti corrosion system designed to withstand severe conditions and high temperatures up to 600° C.
A 100% acrylic resin, high performance primer coat designed for use under Bedec Aqua Advanced.
A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.
A tough anti-slip aliphatic polyurethane floor coating, which forms a colour-fast, abrasion and weather resistant film.
A unique new water based metal primer that can be used on most metal surfaces internally and externally, prior to painting.
A solvent free, high build, two pack polyurethane mastic for steel, for the repair of pipe coatings and the coating of field joints.
A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.
A premium, high gloss marine enamel for use on all boat marine substrates above the waterline.
A versatile quick drying, single pack anti-corrosive primer for steel.
A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...
A high performance single pack water based rust converter. Suitable for use on structural steel and machinery.
An industrial detergent used for degreasing oily or soiled surfaces prior to painting.
A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.
A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
A tough, hard wearing finish coat for application over properly primed surfaces.
For use on a wide variety of substrates including hand prepared rusty steel.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.