Full Product Catalogue

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.

A white spirit based, single pack quick drying primer for the protection of metal against corrosion.

Zinga 500ml 96% Zinc aerosol with all the protection of Zinga 96% Zinc Cathodic Protection.

Anti corrosion system designed to withstand severe conditions and high temperatures up to 600° C.

A 100% acrylic resin, high performance primer coat designed for use under Bedec Aqua Advanced.

A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.

A tough anti-slip aliphatic polyurethane floor coating, which forms a colour-fast, abrasion and weather resistant film.

A unique new water based metal primer that can be used on most metal surfaces internally and externally, prior to painting.

A solvent free, high build, two pack polyurethane mastic for steel, for the repair of pipe coatings and the coating of field joints.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

A premium, high gloss marine enamel for use on all boat marine substrates above the waterline.

A versatile quick drying, single pack anti-corrosive primer for steel.

A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...

A high performance single pack water based rust converter. Suitable for use on structural steel and machinery.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

For new unpainted zinc coated/galvanized sheet-iron and steel surfaces.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.