Full Product Catalogue

For long-term protection of hot pipework, equipment and other hot surfaces.

An economical paint solution for the refurbishment of skips and containers.

An economical one coat primer/finish. Quick drying with high sheen level.

A general purpose anti-corrosive metal primer, giving a high build matt finish.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

A single component, fast drying, high build alkyd shop primer that is suitable for mild to moderate corrosive environments.

A highly cross-linked, two component, high build epoxy phenolic coating.

A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.

A two-component epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.

A primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environment.

A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.

A high quality enamel for use at temperatures up to 600°C indirect heat.

For wood, GRP, steel and ferro-cement yachts and motor boats, used on all interior surfaces to provide a protective finish.

Designed to withstand heats of up to 425°C in sheltered or interior environments.

Solvent based primer and topcoat for ultimate corrosion protection in low temperatures.

Suitable for a many environments including extreme heat up to 300°C. Designed for steel surfaces.

A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.

A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

A water-borne anti-corrosive semi-matt paint for direct to metal application. Available in a huge range of stock colours, tintable to thousands of sha...

A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection and low temperature capability....

An anti-corrosive which can be applied directly to mechanically prepared shop primer or suitably prepared bare steel.

A unique new water based metal primer that can be used on most metal surfaces internally and externally, prior to painting.

A high performance single pack water based rust converter. Suitable for use on structural steel and machinery.

A powerful efflorescence remover that does not require neutrilsation after use.

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

A one pack coating that contains 96% zinc to provide cold galvanizing cathodic protection of ferrous metals.

A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.