Full Product Catalogue

A two component polyamide cured waterborne epoxy primer which is particularly suitable when solvents are not permitted, for health and safety reasons....

Provides you with the safest and most effective water based stripping system available on the market today.

7800mm long Thermoplastic Caterpillar for School Playground Games Playground Markings and Logo's.

3000mm. Thermoplastic 8 Point Compass for Children's Playgrounds.

School Playground Picture Graphics, Logo's and Lines for Children's Games.

Thermoplastic game ideal for playgrounds in schools.

Thermoplastic Chess Board Ideal for use in School Playgrounds.

3.5m Round Thermoplastic Dart Board ideal for use in School Playgrounds.

Basketball Thermoplastic set 29m x 15m for School Playgrounds.

A protective acrylic waterproof coat suitable for surfaces which are in permanent contact with water, such as flat roofs and water tanks.

A single pack, fully reinforced, cold liquid DIY applied system which means no on site mixing and no need for heat or naked flames.

Moisture Curing Polyurethane Coating for Polymeric Tennis Court and Sports Surfaces.

For steel from PPG Sigma, Ameron. Highways Approved Item No.185.

A two component high solids glassflake reinforced polyamine adduct epoxy coating Highways Approved Item No.123

Offers long term protection in areas subject to wear and tear and can be applied in temperatures down to 10°C.

A one component solvent based acrylic eggshell finish coat designed for use as part of Steelguard intumescent fire coatings.

A solvent free coating for protecting concrete, steel and aluminium substrates in highly aggressive chemical environments.

A self-priming epoxy with good impact and abrasion resistance. BBA Cert. no. 08/H135-PS1. Highways Approved Item No.123.

Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...

A two part, solvent free, very low VOC emission certified, elastic, self-smoothing PUR resin.

A two component solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.

Cures, hardens and seals fresh or hardened concrete. Controlling dust, It is suitable for new and existing concrete floor surfaces.

A solvent based, clear acrylic resin polymer solution for curing, hardening and sealing concrete surfaces.

The largest screen on the market for the portable wireless camera system that works alongside SKYVAC systems.

A solvent coating which resists alkalis and ageing on mineral substances including concrete and cementitious surfaces.

A one part primer for very dense or porous concrete surfaces and/or difficult application conditions.

A 2 pack primer offering excellent adhesion and protection properties for steel in the harshest of environments up to C5M-low.