Full Product Catalogue

Formulated for application to new, bare steel, blasted steel or galvanized steel surfaces to provide a clear finish. Copper, chrome, silver, bronze, n...

A high build anti corrosive protection for steel and galvanised steel structures, including fences, galvanised ducts/cladding etc.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A ready-to-use flexible liquid roof membrane with fibres for continuous waterproofing layers on exposed surfaces.

A zinc rich coating formulated as an easily applied, cold galvanising protector against corrosion on all ferrous metals.

A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.

A two component water borne epoxy coating for corrosion protection. Designed for where short dry to handle and over coating times are required.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

A premium, high gloss marine enamel for use on all boat marine substrates above the waterline.

Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

A water-borne, full matt, alkyd based adhesion primer. For wooden and galvanized surfaces indoors. For wooden surfaces outdoors.

A quick drying, low odour, primer/finish coat, with stain blocking, and anti corrosion, which can be tinted to most colours.

Anti-corrosive paint and adhesion primer for iron and steel surfaces as well as aluminium outdoors and indoors.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A phosphoric acid based mordant solution for treating galvanised steel. Highways Approved No. 155.

A full matt water-borne acrylate dispersion primer for walls and ceilings indoors.

A pretreatment agent for maintenance painting.

A single pack phosphoric acid etch solution for the preparation of fresh galvanised surfaces prior to painting.

A single pack, single coat, metal and Plastisol cladding paint.

A water-borne urethane alkyd based top coat for window frames, doors, garden furniture indoors and outdoors.

A single pack acid etch primer free from zinc chromate that is ideal for use as a pretreatment primer above water.

A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.

A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.

A two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retention.

A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.