Full Product Catalogue

A low viscosity Primer/Saturant for steel and concrete.

A VOC compliant, single component, water based anti-corrosive primer/finish.

A single component, water based acrylic finish for use in industrial environments.

Formulated to provide up to 60 minutes fire protection on internal 'I' sections beams, columns and hollow sections.

Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.

A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. Provides a high quality, cosmetic finish.

A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.

A water-based rust remover which is 100% biological degradable and free from toxins.

Intumescent coating for 60 minutes fire resistance to structural steelwork.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.

A single component waterborne acrylic thin film intumescent coating for use to provide fire protection of structural steel exposed to cellluosic fire ...

A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.

A white spirit based, single pack quick drying primer for the protection of metal against corrosion.

An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.

A single pack, thin film 120 minutes intumescent coating designed for site application via airless spray onto structural steel.

A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.

A water based TCEO free, thin film intumescent coating for up to 90 minutes fire protection on structural steel.

A water based CEP free thin film intumescent coating to provide fire resistance up to 120 minutes on structural steel.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

Bollom Brosteel Ultra 60 intumescent paint fire proof paint for steelwork. Provides up to 60 minutes resistance.

A rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.