Full Product Catalogue

For use on interior walls and ceilings.

A single pack, solvent based special varnish suitable for interior and exterior woodwork.

A full-matt water-borne acrylate-based paint for wooden surfaces such as wooden cladding, weatherboarding, facia boards etc.

Suitable for top coating furniture with wooden and primed metal surfaces.

An air drying, water borne topcoat for direct adhesion onto most powder coated surfaces and ABS and polystyrene plastic.

For dry indoor spaces such as interior walls and ceilings.

A clear surface coating, available in a matt and gloss finish, offering excellent protection against graffiti and poster vandalism.

No Bicycles Stencil for Road Marking. Made from semi-clear robust 350 micron polyester material in 4 sizes.

A high build, low odour, one coat primer / finish cladding paint formulated to protect profiled metal cladding and plastisol from the elements.

A water based, CO2 inhibiting, water repellent protective coating for renovation and repair measures on concrete surfaces.

For gutter cleaning within large commercial environments, up to four storeys high, especially where electrically is not easily accessible.

Formulated for thinning and cleaning up alongside our Centrecoat HB Anti-Corrosive Cladding Paint.

A two part, very low yellowing, low viscous, transparent epoxy resin for mortars, screeds and seal coats.

A single pack phosphoric acid etch solution for the preparation of fresh galvanised surfaces prior to painting.

Medium strength, high build repair mortar for repairing concrete.

An economical one coat primer/finish. Quick drying with high sheen level.

An aqueous product for sealing of end grain of new wood designated for exterior use including wooden windows and doors.

An aqueous industrial wood preservative for new untreated wood designated for exterior use as defined in BS/EN 335-1 such as windows and doors.

A very fast reacting transparent binder for blind coatings that can full cure down to 0°C.

A very fast reacting pigmented coating for use as either a base coat or top sealant in Remmers flooring systems.

An elastic rubber water free cleaning paste for the removal of dust, soot, nicotine residue and other soiling on walls.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

A two component high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.

An external water based smooth, premium masonry paint with added P.T.F.E.

A general purpose anti-corrosive metal primer, giving a high build matt finish.

An accelerated thinner for Selemix Direct 7-53x.

A single pack, single coat, metal and Plastisol cladding paint.