£9.95 delivery on orders excluding certain products & postcodes *
A two pack epoxy anti-corrosive primer for application to steel which is clean and free from scale and / or rust.
A marine grade protective coating formulated for use on marine wood and steel. Suitable for fishing trawlers.
A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.
A two pack gas resistant waterproof coating for waterproofing and protecting concrete structures.
Glossy, general purpose topcoat. For mildly to moderately corrosive environment. For exterior and interior usage.
A one pack acrylic thin film base coating for the protection for internal and semi exposed structural steelwork up to 60mins.
Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.
Suitable for a many environments including extreme heat up to 300°C. Designed for steel surfaces.
An anti-corrosive primer that penetrates metal and stops rust to steel structures, motor vehicles, civil engineering and marine equipment.
Resists temperatures up to 750°C. Suitable for bare metal or slightly rusted surfaces, for BBQ's engines, heat cannons, pipes, and vents.
A fast drying solvent-based epoxy resin base. Contains rust inhibitive pigments to protect all metal surfaces.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112
A high build anti corrosive protection for steel and galvanised steel structures. For fences, galvanised ducts/cladding etc.
A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.
A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...
A 2 pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
A low VOC, 2 pack, internally flexibilised, high build, low temperature curing down to -5°C.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).
A 2 pack epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.
A 2 pack, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.
A high solids, 2 pack epoxy brushing and spraying mastic, with micronised glass flake, aluminium and anti corrosives.