Full Product Catalogue

A 1 pack, water based, crack-accommodating elastomeric protective coating for reinforced concrete and masonry structures.

A high performance crack-bridging elastomeric acrylic protective and decorative coating for concrete and masonry.

A heavy duty, trowel applied polyurethane floor screed for use on concrete and polymer modified cementitious screeds.

The ULTIMATE paint solution for rejuvenating tired driveways, patios and floors! Costs less than £1 per m2 per coat!

Coo-Var Swimming Pool Paint for pools, ponds etc. Tintable to a range of colours.

Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration.

For quick repair of fine crack and holes in warehouse, workshop and concrete floors.

A two pack epoxy resin oil tolerant primer.

Designed as a crack-bridging intermediate coat in combination with Sikagard® 550 W Elastic.

A one part clear siloxane water repellent for walls and absorbent cementitious substrates.

A very durable, solvent-based, spray applied textured coating with crushed marble aggregates and special preservative agents for algae and fungal film...

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.

A quick drying and versatile, non-yellowing water based paint, available in a wide range of colours and a choice of finishes.

For garage, warehouses floors, concrete, tiles, ferrous steel, stainless steel, timber and galvanised steel.

A hard wearing two-component water based epoxy floor paint and wall paint for interior use.

Premium Quality Teamac G149 Chlorinated Rubber Paint for swimming pools, ponds etc.

Paint for Waterproofing Basements use on Damp and Wet Walls, stops up to 34 lbs of water pressure.

A tough, durable, high opacity floor coating, contains special aggregates for outstanding slip resistance.

A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.

Stain killer with high hiding formula. One coat is all that is needed to cover and seal most surfaces.

A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.

Formerly Liquid Plastics Sterimatt 206W. A hygienic waterborne modified acrylic resin surface coating with a matt finish.

A high performance epoxy system for application at temperatures down to 0°C.

Safekote polyurethane coating incorporating non-slip particles that provide an attractive slip-resistant surface for wet or dry.

For use on concrete floors in industrial and storage facilities, repair shops.

Fast Setting for Deep Holes in Concrete and Power Floated Floors and slabs.

Mortar that will work at temperatures as low as -35°C.

Highly concentrated solution for roofs, guttering and driveways which destroys moss, mould and fungi on patios drives etc.