£9.95 delivery on orders excluding certain products & postcodes *
A 1 pack, PU MIO sealer For use over Zinga and Aquazinga, providing a protective seal against salt and chemical exposure.
A one pack moisture curing, polyurethane, MIO paint designed to replace normal cold tar products.
Zinga EP Thinner HS is the recommended thinning solution for Zingaceram HS.
A quick drying, satin, water based, non-yellowing enamel for interior and exterior woodwork.
A 100% acrylic resin, high performance primer coat designed for use under Bedec Aqua Advanced.
A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.
A two part PUR product for use as part of the Sika ComfortFloor range and for interiors where a low odour product is required.
A varnish enriched with polyurethane resin that is odourless, colourless, protective and decorative water based varnish for interior wood.
A clear, semi gloss wood grain filler to fill small surface imperfections in wood prior to application of a top varnish.
A solvent based, colourless, decorative and protective high resistance varnish inriched with polyurethane resins for interior wood.
A microporous penetrating, coloured water based woodstain with built in primer and finish For interior and exterior use.
A solvent based, long lasting, UV protecting, highly flexible woodstain suitable for old or damaged interior and exterior wood including cladding.
A decorative, satin, water based, quick drying wood stain. Excellent UV resistance for interior / exterior vertical woodwork.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...
A high build 2-pack polyamide cured epoxy zinc phosphate primer finish for use as an internal flow coating for pipelines.
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.
An M24 spec low temperature curing, surface and humidity tolerant two pack modified epoxy anti corrosive coating for long life steel protection.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A single pack, thin film 120 minutes intumescent coating designed for site application via airless spray onto structural steel.
A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.
A water based TCEO free, thin film intumescent coating for up to 90 minutes fire protection on structural steel.
A water based TCEP free, thin film intumescent coating providing protection for up to 120 minutes on structural steel.