Full Product Catalogue

A one component physically drying acrylic, high build, fast drying coating with a matt finish for application direct to metal.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

Based on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.

A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.

A two pack, semi gloss polyurethane coating for steel structures subject to weathering or chemical stress. LuL APR No.2940

A water-borne anti-corrosive semi-matt paint for direct to metal application. Available in a huge range of stock colours, tintable to thousands of sha...

Water based paint for use on either interior or exterior wood, window trims and metal.

Single Pack Primer for Steel, Aluminium and Zinc surfaces.

A degreaser suitable for use on a range of different surfaces.

A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

Compatible Thinner for Centrecoat QD Gloss Spray.

A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A quick drying single pack acrylic resin based topcoat for use as a finishing coat for application to either steel or concrete substrates.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...

For internal walls and ceilings where surfaces must be hygienic, easy to clean and resistant to abrasion.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A two component acrylic polyurethane finish giving excellent durability and long term recoatability.

A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.

A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.

For use on a wide variety of substrates including hand prepared rusty steel.

A full matt, water-borne, acrylate-based adhesion primer for wash and wear resistant top coats on internal walls and ceilings.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

A light reflective single pack oleoresinous aluminium coating that is ideal for pipework, cargo holds, etc.

A fast drying, single pack modified acrylic cosmetic finish for above the waterline in marine environments.