£9.95 delivery on orders excluding certain products & postcodes *
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.
A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.
Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.
A solvent free, high build, two pack polyurethane mastic for steel, for the repair of pipe coatings and the coating of field joints.
A solvent free, fast curing, two pack polyurethane repair mastic for pipe coatings.
A solvent free, two pack polyurethane mastic repair kit for the repair of small defects in pipeline coatings.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.
A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.
A light reflective single pack oleoresinous aluminium coating that is ideal for pipework, cargo holds, etc.
A patented technology, high performance, low VOC single pack acrylic polysiloxane finish coat containing no free isocyanates.
A two-component, amine adduct cured phenolic epoxy (novolac) tank and pipeline coating.
A heat resistant aluminium pigmented polysiloxane paint for the protection of hot pipelines up to 600°C.
A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109
Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.
A high gloss paint coating offering an aluminium finish which will not flake or peel even at temperatures of 175°C.
A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.
Formerly PPG SigmaLine 403. Designed to reduce the frictional resistance inside of steel pipes for the transportation of purified natural gas.
A two pack gas resistant waterproof coating for waterproofing and protecting concrete structures.
A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.