£9.95 delivery on orders excluding certain products & postcodes *
A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.
A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.
A functional coating for identification of hot spots and internal insulation failures.
A single component, water-based rust remover / cleaner gel for a range of substrates.
A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.
A two component protective coating for use in high traffic, atmospheric and immersed environments.
A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.
Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.
A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.
A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.
A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.
A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....
A two component solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.
A two component protective coating for use in high traffic, atmospheric and immersed environments.