Full Product Catalogue

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.

A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.

A white spirit based, single pack quick drying primer for the protection of metal against corrosion.

An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.

A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.

A water based TCEO free, thin film intumescent coating for up to 90 minutes fire protection on structural steel.

A water based CEP free thin film intumescent coating to provide fire resistance up to 120 minutes on structural steel.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

Bollom Brosteel Ultra 60 intumescent paint fire proof paint for steelwork. Provides up to 60 minutes resistance.

A rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.

A quick drying, gloss, brush applied container and skip metal paint.

A one component, solvent-borne, fast drying intumescent coating for passive fire protection of structural steel.

Fast drying intumescent coating for structural steel.

Single Pack Primer for Steel, Aluminium and Zinc surfaces.

A fast drying anti-corrosive primer for steel surfaces.

A two component polyurethane paint with good gloss retention and colour stability.

A high zinc content primer with outstanding resistance to severe weathering.

A solvent free coating designed for installation onto steel or concrete surfaces.

For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.

A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.

A low viscosity Primer/Saturant for steel and concrete.

A VOC compliant, single component, water based anti-corrosive primer/finish.

Formulated to provide up to 60 minutes fire protection on internal 'I' sections beams, columns and hollow sections.

Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.