£7.75 delivery on orders excluding certain products & postcodes *
Patio Decking Hard Surface Restorer for walls, floors, paths, roofs, decking, paving, boats and monuments.
A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.
Recommended for protecting marble, granite or natural stone facings against graffiti drawn with spray-paint, crayons, markers, etc.
A solvent coating which resists alkalis and ageing on mineral substances including concrete and cementitious surfaces.
Removes salts and deposits from concrete and mortar or smooth surfaces such as power floated floors prior to painting.
Formerly Liquid Plastics. Bonding Primer is a rapid curing, water based primer for Roofing or Balcony systems and Sika Hygiene products.
A water based environmentally friendly clear sealer containing the highest quality polyurethane and acrylic Resins.
A biological stain remover for cleaning concrete driveways, block paving and other surfaces.
2 component cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools.
For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. This concentrate will treat up to 40m2.
Fast repair mortar for repairs in façade areas that are not statically or dynamically stressed.
Kit consists of a two part epoxy coating, a cleaning solution, decoration chips, paint paddle and an instruction DVD.
A two component coating for use in atmospheric and immersed environments.
Removes common construction and atmospheric staining from smooth architectural and engineered concrete.
EpoxyShield Clear Sealer Primer and floor sealer 5220, a water based clear and non yellowing coating.
A high-performance, water based acrylic floor paint for floors, driveways and paths. Recoatable in just 1 hour.
A high crack bridging, anti carbonation, water repellent masonry paint for walls and Park Homes.
Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.
A fast curing, high strength, two component Methacrylate Resin mortar, formulated for rapid and permanent repairs to concrete surfaces.
A fast curing, high strength, trowel applied, three part Methacrylate Resin mortar.
A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.
A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.
A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.
A two pack, pourable, flexibilised methacrylate sealant suitable for direct pouring into horizontal floor joints.
A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.
Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.
A 2-part, low odour, low viscosity, multi-purpose epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed.