Full Product Catalogue

A white spirit based, single pack quick drying primer for the protection of metal against corrosion.

A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.

A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

A single pack medium to high temperature coating that withstands continuous temperature up to 400ºC, and peaks up to 540°C.

A quick drying, gloss, brush applied container and skip metal paint.

A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

A two pack corrosion resistant metal primer formulated as a weldable pre-construction primer or field or shop applied primer.

A two pack, high solid aluminium pigmented, low temperature curing modified epoxy mastic.

Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.

A quick-drying alkyd primer containing zinc phosphate. Ideal for the protection of steel.

Solvent based primer and topcoat for ultimate corrosion protection in low temperatures.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

A high build, low odour, one coat primer / finish cladding paint formulated to protect profiled metal cladding and plastisol from the elements.

An economical one coat primer/finish. Quick drying with high sheen level.

A general purpose anti-corrosive metal primer, giving a high build matt finish.

A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.

A two pack epoxy primer / undercoat / tie coat for internal ship spaces.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.