£9.95 delivery on orders excluding certain products & postcodes *
Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.
A glass flake vinyl ester acrylic co-polymer that is approved to NORSOK Rev 6 System 7A and 7B.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109
Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.
A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.
A two component, high build, amine adduct cured, phenolic epoxy holding primer.
Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.
A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.
A two component, moisture curing, zinc rich silicate coating used as a tank coating to provide excellent solvent and chemical resistance.
A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.
A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.
An ultra high solids epoxy novolac amine engineered specifically for immersion service in storage tanks.
A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.
A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.
Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).
A 2 pack structural steel and piping coating that will continue to cure while immersed.
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.
Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.
Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.
A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.