£7.75 delivery on orders excluding certain products & postcodes *
Structural Steel Paint
If you are looking for structural steel paint then make sure that you take a look at the wide range of products that we have available here at Promain. Our range of structural steel paint are perfect for use on structures that require extreme durability due to the harsh conditions that they are subjected too and they also have a life expectancy of 25 years so you can be sure that they are high performance products that are definitely a value for money. Here at Promain we would only ever make sure that we stock the very best products from only the most trusted manufacturers in the business who we know constantly provide the very best products possible when it comes to structural steel paint.
Shop By
Filter by
Filter by
- Price £100.00 and above Remove This Item
-
PPG Steelguard 851A single component thin film solvent borne intumescent coating for the cellulosic fire protection up to 120 minutes on structural steelwork.
-
Sherwin Williams Zinc Clad II EU Ethyl Zinc Silicate PrimerA self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
-
Jotun Barrier 80A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
-
Selemix SPP2000 Paint Performance Enhancer, 1 LitreCombine to any compatible Selemix topcoat to improve water repellence, dirt pick up and graffiti resistance.
In stock -
-
Selemix Direct Pro 7-15xAcrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.
-
Sherwin Williams Envirolastic 2500Suitable for use in a range of markets where durable performance and aesthetics are needed.
-
Jotun Marathon 550A 2 pack structural steel and piping coating that will continue to cure while immersed.
-
International Interfine 629HSA low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.
-
International Interzone 1000A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.
-
International Intergard 1735A high performance, low VOC, water borne two component epoxy with a high gloss finish for use on structural steel and concrete floors.
-
International Interzone 1000 LTA very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.
-
Hempel Hempadur Multi-Strength 45540A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.
-
Hempel Hempadur Multi-Strength 45753A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.
-
Jotun Penguard WFA two component water borne epoxy coating for corrosion protection. Designed for where short dry to handle and over coating times are required.
-
Zinga Zingatarfree (Formerly PU Tarfree MIO)A one pack moisture curing, polyurethane, MIO paint designed to replace normal cold tar products.
-
Sherwin Williams Macropoxy C402V2 Primer - Formerly Leighs EpigripA high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...
-
Sherwin Williams Macropoxy G280 - Formerly Leighs Metagard G280A two pack epoxy, zinc free prefabrication primer formulated as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning....