£9.95 delivery on orders excluding certain products & postcodes *
Promain have a wide range of certified coatings for both internal tank linings and external works. Whether you are looking for coatings for the internals of grain and dry foodstuff silos or for storage of chemicals we have a range of approved products. Promain are proud to supply coatings suitable for use in the petrochemical industry for the transportation and storage of petrol, diesel, jet fuel, gasoline, crude oil and more. We also supply coatings for the inside of ballast tanks.
View our extensive selection of tank linings below from manufacturers including Sika, Sherwin Williams, PPG, International, Jotun and Hempel.
An epoxy powder coating particularly suitable for storage tanks for the water industry.
A two component surface tolerant, high solids, high build coating. NORSOK approved.
A durable tank lining with very high corrosion protection properties and excellent chemical resistance.
A two component, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.
A two-component, solvent-free, amine-cured modified phenolic epoxy tank coating suitable for aviation fuel.
A light reflective single pack oleoresinous aluminium coating that is ideal for pipework, cargo holds, etc.
A patented technology, high performance, low VOC single pack acrylic polysiloxane finish coat containing no free isocyanates.
A two-component, amine adduct cured phenolic epoxy (novolac) tank and pipeline coating.
An oleoresinous general purpose aluminium paint with good heat resistance and good light reflection.
A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...
A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.
A two part, epoxy wall coating suitable for use alongside resin flooring to provide a continuous seamless finish.
An epoxy novolac coating designed to provide protection to concrete and steel structures in aggressive chemical conditions.
A two component, solvent-free, high build epoxy coating specifically developed for use in normal to moderately aggressive chemical environments.
A two component, high build, amine adduct-cured novolac phenolic epoxy coating for offshore, marine and chemical / petrochemical sectors.
A two component, solvent free, chemically resistant, heavy duty epoxy phenolic tank lining.
A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.
Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.
A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.
An ultra high solids epoxy novolac amine engineered specifically for immersion service in storage tanks.
A two pack gas resistant waterproof coating for waterproofing and protecting concrete structures.