£7.75 delivery on orders excluding certain products & postcodes *
Many people overlook preparation of substrates before painting. Be it walls, roof, driveways or any other surface. Fungicidal wash is one of the treatments often overlooked by a lot of people. The main purpose of fungicidal wash is to clean and protect the surface before it is painted. This will stop green growth from forming either on or under the paint coating on any concrete or masonry surface.
To extend the appearance of your masonry paint, Centrecoat have produced Centrecoat R155 Fungicidal Paint Additive. This can be added to water-based paints, masonry paints and wood paints to prevent mould, algae and fungicidal growth.
Keim Contact Plus Grob is a highly filled silicate based priming coat. It is used as a bonding bridge between sound, existing coatings and Keim Mineral Paints. This will also help to even out the surface giving a sharper finish to the project.
900% elastic, use for sealing, jointing, filling, fixing and gluing window, door frames and roofing sheets
A water borne alkyd based full-matt adhesion primer for wooden surfaces externally.
Highly concentrated solution for roofs, guttering and driveways which destroys moss, mould and fungi on patios drives etc.
Provides reliable shielding from high-frequency electromagnetic fields and low-frequency electrical fields.
A slightly textured mineral filler primer which regulates the texture of interior and exterior mortar, brick, concrete and old paint.
A renovation putty for the repair of surface defects. Filling small defects such as crevices, small holes and surface cracks (1-2 mm) and to repair ch...
For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. This concentrate will treat up to 40m2.
A single pack, solvent free strengthening concentrate for priming & horizontal waterproofing.
An efficient additive for water based paint products to prevent mould, algae and fungicidal growth.
R2-class, rapid-setting shrinkage compensated thixotropic, fibre-reinforced, cementitious mortar applied in a single layer from 3 to 40mm thick, for r...
A ready to use, aqueous pretreatment or protective agent against algae and fungi infestation.
A highly filled silicate based priming coat, used as a bonding bridge between sound, existing coatings and Keim Mineral Paints.
Priming coat to equalize differences in texture and/or to fill small hairline cracks.
Specially formulated as a ready to use silicate-based filler for use on interior and exterior mineral substrates.
For the protection of facades against the driving rain and subsequent treatment or renewal of hydrophobic surfaces.