Full Product Catalogue

An internal and external masonry paint available in various grain sizes for use where mould or fungi growth can be an issue.

Two-component epoxy paint for anti-acid coating of concrete surfaces.

Medium strength, high build repair mortar for repairing concrete.

A kiln dried quartz sand for use with Mapei epoxy and polyurethane resins. Available in 0.25, 0.5, 0.9, 1.2 and 1.9mm particle sizes.

A solvent free, low odour acrylic primer for interior use to aid adhesion on all absorbent and non absorbent surfaces.

A polymer modified cement based textured render finish supplied in powder form to be mixed with water. Suitable for winter use.

Fast setting light – coloured fine mortar for repairs and finishing of concrete and renders.

Quick-setting, fibre-reinforced cementitious mortar for internal and external floors and walls, applied at a thickness from 3 to 30mm to smooth out ir...

A medium strength (40 MPa), shrinkage-compensated, fibre reinforced, thixotropic mortar for concrete – class R3.

A sulphate resistant, fibre reinforced shrinkage compensated thixotropic mortar for the repair of concrete – class R4.

One component corrosion-inhibiting cement for the protection of reinforcing rods.

A two-component multi-purpose neutral-coloured epoxy formulate in water dispersion to create vapour-permeable coatings on industrial floors.

A filling and evening layer for covering small imperfections in cementitious surfaces before applying a finish coat from the Mapei Silancolor range.

Recommended for protecting marble, granite or natural stone facings against graffiti drawn with spray-paint, crayons, markers, etc.

Recommended for all surfaces not previously treated with graffiti-repellent protection against conventional spray-paints.

Acrylic resin undercoat in water dispersion to even out the absorption of substrates before applying other products.

A solvent-based fixing primer with high penetration properties for porous substrates and curing agent for repair mortars.

An easy to use general purpose bitumen waterproofing emulsion for cold waterproofing masonry and concrete vertical and sloping surfaces.

Self-levelling industrial floor screed based on special hydraulic binders for abrasion-resistant flooring, thickness from 5 to 40mm.

A single pack, solvent free, moisture curing, rapid drying polyurethane membrane, with low VOC's, for waterproofing cementitious screeds.

A two-component epoxy coating suitable for self-levelling and or multi-layer resin flooring with or without a non-slip finish.

Water repellent cementitious skimming mortar with fine, natural finish for concrete and plastic, glass and porcelain coatings.

2 component cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, rapid drying elastic cementitious mortar for waterproofing terraces and balconies, even at at low temperature.

Two-component solvent free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.

An easy to apply on suitably prepared masonry substrates general purpose render for internal and external use.

A solvent free bitumen primer for evening out and improving bonding to substrates before applying a waterproofing product from the Mapei Plastimul ran...

A flowable, quick setting cementitious mortar suitable for application down to temperatures as low as -5°C.