Full Product Catalogue

A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

A general purpose thinner designed to improve the flow of Jotun Tankguard paints.

A general purpose solvent based thinner designed to improve the flow of Jotun inorganic zinc ethyl silicate products.

A quick drying single pack acrylic resin based topcoat for use as a finishing coat for application to either steel or concrete substrates.

A two component transparent polyamide cured high molecular weight epoxy sealer coating for concrete.

A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.

A paint thinner designed to improve the flow of Jotun paints inorganic zinc ethyl silicates being applied at high temperatures.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component water borne epoxy coating for corrosion protection. Designed for where short dry to handle and over coating times are required.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.

Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.

A two component chemically curing epoxy coating that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and ba...

Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.