Full Product Catalogue

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

A general purpose thinner designed to improve the flow of Jotun Tankguard paints.

A general purpose solvent based thinner designed to improve the flow of Jotun inorganic zinc ethyl silicate products.

A quick drying single pack acrylic resin based topcoat for use as a finishing coat for application to either steel or concrete substrates.

A two component transparent polyamide cured high molecular weight epoxy sealer coating for concrete.

A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.

A paint thinner designed to improve the flow of Jotun paints inorganic zinc ethyl silicates being applied at high temperatures.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component water borne epoxy coating for corrosion protection. Designed for where short dry to handle and over coating times are required.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.

Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.

A two component chemically curing epoxy coating that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and ba...

Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

A one component waterborne acrylic thin film 90 minute intumescent coating.

Very good fouling coating that assures a totally active surface continuously renewed providing a clean hull for the whole season.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A solvent based intumescent coating for structural steel exposed to internal environments up to corrosivity category C4 (ISO 12944-2).

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.