Full Product Catalogue

A self-priming, two-component, high-build, pure epoxy paint.

A high build epoxy coating for the protection of metal substrates against atmospheric corrosion. Network Rail Approved.

A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.

A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.

A two-component epoxy paint, which cures to a hard and tough coating.

A self-priming, two-component, high build epoxy paint containing zinc phosphate.

Thinner for use with Hempels Galvosil and Hempadur.

A one part, solvent borne, intumescent coating, optimised for 60 minutes for protection of structural steel against cellulosic fires.

Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.

Formulated to obtain anti-skid properties on decks and other areas where a skid-proof surface is required.

Glossy, general purpose topcoat. For mildly to moderately corrosive environment. For exterior and interior usage.

Cleaner/Degreaser for use in the metal industry as well as ships and shipyards.

A self-priming epoxy with good impact and abrasion resistance. BBA Cert. no. 08/H135-PS1. Highways Approved Item No.123.

An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

Perfect for use with the Hempadur range of marine coatings and can also be used to clean any painting tools.

Specifically designed for use with the Hempathane range of coatings from Hempel.

A two-component polyamide adduct cured, high build epoxy paint. BBA Cert No. 08/H135-PS6. Highways Approved Item No.111

Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

Provides the possibility of reducing the number of primers for maintenance.

A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

A versatile primer for long-term protection of steel in severely corrosive environments.

A universal epoxy and self-primed high performance coating system.

For long-term protection of hot pipework, equipment and other hot surfaces.

A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.