£9.95 delivery on orders excluding certain products & postcodes *
A bonding primer and reinforcement corrosion protection cement based slurry containing recycled waste materials.
A one part, elastic, low solvent containing, low odour, UV resistant, coloured, moisture triggered polyurethane resin coating.
A synthetic rubber and resins based primer for applying self adhesive S-Vap 5000E SA onto various substrates.
A self adhesive vapour control layer and carrier membrane made from polymer modified bitumen with a glass-fibre mat reinforcement.
A polyurethane rebound foam shockpad part of the ComfortFloor® Decorative Pro system from Sika.
A decorative, slip resistant flooring aggregate formulated for use under seal coats of Sikafloor®-169.
A one part, high flow, rapid, high strength cementitious grout.
A fast hardening, high early strength, high final strength, 1 component, shrinkage compensated, free flowing cementitious grout.
A two part, water dispersed, epoxy resin with a high electrostatic conductivity. A component found in many different Sika systems.
A two part, self-smoothing, coloured epoxy resin coating. It should be combined with Sikafloor Filler 1 or Sika Quartz Sand.
A two component, PUR tough elastic coloured seal coat for industrial flooring such as car park decks, ramps or warehouses.
A 3 component, water-based, coloured polyurethane hybrid topcoat with glossy finish suitable for hygienic and food production applications.
A high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete.
A single component, cold-applied, moisture-triggered polyurethane membrane. It cures to form a seamless, durable and weather- resistant waterproofing ...
A polyester fleece used as reinforcement with Sikalastic Liquid Applied Membrane systems.
Formerly Sikafloor 326. A two part solvent free, coloured self-smoothing PUR floor resin, with tough-elastic properties.
A 2-pack acrylic polyurethane ideally suited to all environments where both protective and decorative considerations are present.
A two part, very low yellowing, low viscous, transparent epoxy resin for mortars, screeds and seal coats.
A three part, epoxy modified cementitious, fine textured mortar for self smoothing floor screeds in thin layers of 1.5 to 3mm.
A one part low viscosity, reactive impregnation for concrete and cementitious substrates based on concentrated Silane emulsion.
Polymer Modified Bentonite Waterproofing System. Self healing membrane for basement and below ground structures.
A single component mastic consisting of polymer modified natural sodium bentonite and further polymer additives.