Full Product Catalogue

For use on both internal and external surfaces on boats and ships, for both maintenance and the improvement of aesthetics.

A high build polyamide low temperature tintable zinc phosphate epoxy shop primer/coating for atmospheric conditions.

Formulated to prevent corrosion under insulation (CUI) of carbon steel and stainless steel.

A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...

A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.

A grey, two component, moisture curing, low zinc silicate prefabrication primer suitable for automatic application on shot blasted steel plates.

A two component multipurpose polyamide anti-corrosive epoxy paint system from PPG.

A two component multi purpose polyamide cured anti-corrosive epoxy paint system from PPG.

A two component flint reinforced solvent free polyamine cured, epoxy compound suitable for the protection of steel and concrete.

A two-component, solvent-free industrial, impregnating epoxy floor primer.

A four component solvent free epoxy for high abrasion, heavy traffic floors.

A two component polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.

A 3 component, solvent free, self leveling epoxy floor coating suitable for industrial areas with heavy traffic on to concrete.

A two component, solvent free, amine cured epoxy coating for use as a chemical resistant, surface tolerant tank lining.

A 2 part surface tolerant high solid glass flake epoxy coating primarily designed for use in offshore splash zone maintenance.

A single pack thin film solvent borne intumescent coating for 120 minutes of cellulosic fire protection of structural steelwork.

A single component thin film solvent borne intumescent coating for 90 minutes of protection of structural steelwork against cellulosic fires.

A single component thin film solvent borne intumescent coating for the cellulosic fire protection up to 120 minutes on structural steelwork.

A fast curing, two component, high solids, high build zinc phosphate polyurethane primer / finish for in shop application to steel.

A two component, quick drying, anti-corrosive zinc epoxy primer for use onto suitably prepared steel.

A single component, solvent based thin film intumescent coating for fire protection of structural steelwork for up to 120 minutes.

A two component, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.

A two-component, solvent-free, amine-cured modified phenolic epoxy tank coating suitable for aviation fuel.

A two component, high build, amine adduct-cured novolac phenolic epoxy coating for offshore, marine and chemical / petrochemical sectors.

A two component, high build, amine adduct-cured novolac phenolic epoxy primer for subsequent coats of PPG Phenguard Subsea 780.

A two component high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.

An anti fouling release finish coat based on 100% pure silicone binder technology.

A two component, high build polyamide cured epoxy primer coating for application down to -5°C.