Full Product Catalogue

SigmaCover 690 LT (Aluprimer Winter Grade) for temperatures of 0°C up to +10°C.

Previously PPG SigmaCover 525. An anti-corrosive topcoat providing a water resistant, anti-fouling barrier, which is abrasion and impact resistant.

Formally Amercoat 878 a one component heat resistant moisture curing silicone aluminium.

Waterborne intumescent coating for fire protection of structural steelwork.

Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.

Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).

A self-priming coating for steel and concrete. Formerly PPG SigmaCover 640 / Amerlock 400C.

A 2 pack, fast drying, high solids, low temperatures epoxy coating for concrete and steel. LUL Cert 1329.

Moisture and surface tolerant coating with adhesive and non-skid properties and is For concrete, steel and damp surfaces.

A two component, polyamide cured, epoxy primer that can be used as a general purpose epoxy primer, ideal for use on steel and non ferrous metals.

2 pack high solids, high build, polyamide cured epoxy for general purpose protection to steel and concrete structures.

A two component high solids polymeric urethane paint that can be used to provide excellent protection even in strong atmospheric conditions.

A 2 pack amine adduct cured phenolic epoxy finish. A finish coat within a system for the protection of subsea equipment.

A 2 pack high build heat resistant phenolic epoxy coating for use under insulation systems. Protects up to 230°C.

A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...

A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.

A 2 pack, moisture curing, low zinc silicate prefabrication primer For automatic application on shot blasted steel plates.

A 2 pack flint reinforced solvent free polyamine cured, epoxy compound suitable for the protection of steel and concrete.

A 3 pack, solvent free, self leveling epoxy floor coating. For industrial areas with heavy traffic on concrete.

A 2 part surface tolerant high solid glass flake epoxy coating. For use in offshore splash zone maintenance.

A 1 pack thin film solvent borne intumescent coating for 120 minutes of cellulosic fire protection of structural steelwork.

A 1 pack thin film solvent borne intumescent coating for 90 minutes protection of structural steel against cellulosic fires.

A 1 pack thin film solvent borne intumescent coating for cellulosic fire protection up to 120 minutes on structural steel.

A fast curing, two component, high solids, high build zinc phosphate polyurethane primer / finish for in shop application to steel.

A 1 pack, solvent based thin film intumescent coating for fire protection of structural steelwork for up to 120 minutes.

A 2 pack, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.

A 2 pack, high build, amine adduct-cured novolac phenolic epoxy for offshore, marine and chemical / petrochemical sectors.

A 2 pack, high build, amine adduct-cured novolac phenolic epoxy primer for subsequent coats of PPG Phenguard Subsea 780.