Full Product Catalogue

A fast hardening, high early strength, high final strength, 1 component, shrinkage compensated, free flowing cementitious grout.

A one part flowable shrinkage compensated general purpose cementitious grout.

A fast curing two part polyester anchoring adhesive that is solvent and styrene free.

A popular paint that gives your furniture that shabby chic look that is extremely popular at the moment.

Non-skid additive, can be added directly to the liquid coating or broadcast over the final wet finish.

An inexpensive solution to the hazards associated with worn or slippery steps.

A two part, water dispersed, epoxy resin with a high electrostatic conductivity. A component found in many different Sika systems.

A two part, self-smoothing, coloured epoxy resin coating. It should be combined with Sikafloor Filler 1 or Sika Quartz Sand.

A two component, rapid curing, water-based, epoxy coating designed for industrial and warehouse concrete floors.

High quality, durable, preformed road marking. Fast to apply ensures minimal downtime.

A high quality barrel gun designed for use with Sika 600ml sausages.

A two component, quick drying, anti-corrosive zinc epoxy primer for use onto suitably prepared steel.

A single component, rapid hardening, paintable, thixotropic polyurethane sealant and adhesive with a high rate of elasticity.

A two component, PUR tough elastic coloured seal coat for industrial flooring such as car park decks, ramps or warehouses.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A silicate based primer coat for interior use to equalise different absorbencies on repaired or filled surfaces.

For garage floors, workshop floors, factory floors etc. Externally on paths drives and patio paving slabs.

A flexible fibroreinforced, acrylic rustic effect plaster for internal and external application to protect walls and even out surface imperfections.

A water repellent, high filling siloxane plaster for external and internal use, to provide rustic effect to walls.

An acrylic undercoat used to level or improve bonding and absorption before the application of the final coat.

A self-adhesive tape designed for work for edge laps when applying Rustoleum Noxyde systems to roofs and cladding.

A compatible thinner for Selemix Direct, Selemix 7-110 and Selemix 7-510.

Compatible hardener for Selemix 2 pack paints 7-413 and 7-414.

Compatible accelerator for Selemix Direct.

A synthetic resin based water-dispersion primer with very low VOC's.

An ideal tool for cleaning wooden deck boards with Osmo Reviver Gel.

A durable, odourless, stain resistant, high end semi gloss enamel for internal walls. Formulated as easy to clean.

A cement free, fibre-reinforced, lightweight, elastic, skimming paste and base coat. Resistant to biological agents for internal and external use.