Full Product Catalogue

A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.

A two-component epoxy polyamide shop primer, pigmented with zinc phosphate rust-inhibiting pigments.

A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.

A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.

A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.

A 2 pack epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.

A 2 pack, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.

A versatile, high performance maintenance coating.

A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency Item No.110

A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.

A 2 part etch primer suitable for achieving adhesion of polyurethane to all types of aluminium and other metal types where adhesion is problematic.

A self-priming, two-component, high build epoxy paint containing zinc phosphate.

A two pack epoxy anti-corrosive primer for application to steel which is clean and free from scale and / or rust.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

For use below the waterline and harsh marine environments.

A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.

A two pack gas resistant waterproof coating for waterproofing and protecting concrete structures.

A fast drying solvent-based epoxy resin base. Contains rust inhibitive pigments to protect all metal surfaces.

A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...

An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112

Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

A high performance epoxy system for application at temperatures down to 0°C.

A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.

A high solids, 2 pack epoxy brushing and spraying mastic, with micronised glass flake, aluminium and anti corrosives.

A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110

A two pack corrosion resistant metal primer formulated as a weldable pre-construction primer or field or shop applied primer.

A high build solvent free epoxy offering a smooth tile like finish, excellent protection against solvents and oils.

Advanced coating offers quicker drying and reduced risk when curing at sub-zero temperatures.