Full Product Catalogue

A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.

A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.

A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.

A two-component, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.

An oleoresinous general purpose aluminium paint with good heat resistance and good light reflection.

A two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retention.

A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.

A water-borne, acrylic dispersion paint with good anti-corrosive properties.

Very good fouling coating that assures a totally active surface continuously renewed providing a clean hull for the whole season.

A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.

A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.

A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.

A two-component polyamide adduct-cured epoxy paint. BBA Cert. no. 08/H135-PS11. Highways Approved Item No.159.

A single pack product for improving the adhesion properties of solvent based surface coatings.

A quick drying and versatile, non-yellowing water based paint, available in a wide range of colours and a choice of finishes.

A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

A single pack medium to high temperature coating that withstands continuous temperature up to 400ºC, and peaks up to 540°C.

A quick drying water-based single pack anti corrosive primer for interior and exterior surfaces. LUL Approval No.2447.

An ideal universal primer or single coat topcoat for steel, zinc or aluminium subject to severe abrasion or chemical stresses.

Quick-drying adhesion primer for priming and undercoating new and previously painted surfaces.

Plastic end tool ideal for use on aluminium gutters and down pipes.

Single Pack Primer for Steel, Aluminium and Zinc surfaces.

A pigmented, water-borne, fast-drying 2-component coloured polyurethane / acrylic lacquer for plastic, wood, and metals.

A water-based rust remover which is 100% biological degradable and free from toxins.

A fast curing epoxy primer for use with International 3200 product series.

A 2K high build epoxy primer containing anticorrosive pigments.

An epoxy powder coating particularly suitable for storage tanks for the water industry.