£9.95 delivery on orders excluding certain products & postcodes *
A two pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).
A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.
A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.
A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.
A two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.
A solvent based intumescent coating for structural steel exposed to internal environments up to corrosivity category C4 (ISO 12944-2).
A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109
A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155
A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.
Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.
Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration, can also be used as part of a high pressur...
A high gloss coach enamel available in historic colours.
A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.
Lead Free low temperature anti-rust, corrosion resistant, top coat suitable for metal & plastic.
Sigma AquaCover 400 two component polyamine cured water borne epoxy coating for steel and concrete.
Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.
A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116
A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.
Offers excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).
A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.
A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.