£9.95 delivery on orders excluding certain products & postcodes *
A decorative high performance woodstain with UV resistance for interior and exterior vertical wood surfaces.
A multipurpose, semi-transparent, dry film antifungal penetrating woodstain suitable for both interior and exterior use.
A silicate paint that optimises air quality, making use of the MiNox effect, photo-active pigment can decompose organic pollutants and odours.
Stud Fence Stain prevents harm to horses by discouraging the ingestion of fencing and rough sawn timber.
A ultra high performance, transparent, siloxane resin, water-repellant impregnator to protect exposed concrete, stone, bricks and tiles from rain.
A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.
Suitable for interior wooden flooring where a higher slip resistance is required such as stair treads.
A silicate based primer to promote bonding and to even out the absorption of the substrate before the final application of coloured top coats from the...
An aluminium flake based finishing top coat with a satin finish of pure aluminium.
A film galvanising touch up to match a hot dip galvanised surface in an easy-to-use semi gloss aerosol.
Anti corrosion system designed to withstand severe conditions and high temperatures up to 600° C.
A high spec, 2 pack, anti corrosion intermediate MIO coat for steel structures at risk from severe abrasion.
A one pack moisture curing, polyurethane, MIO paint designed to replace normal cold tar products.
Zinga EP Thinner HS is the recommended thinning solution for Zingaceram HS.
A quick drying, satin, water based, non-yellowing enamel for interior and exterior woodwork.
A 100% acrylic resin, high performance primer coat designed for use under Bedec Aqua Advanced.
A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.
A base coat formulated to even out surfaces by filling defeats on old render prior to Mapei Silexcolor Top Coat.
A varnish enriched with polyurethane resin that is odourless, colourless, protective and decorative water based varnish for interior wood.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...
A high build 2-pack polyamide cured epoxy zinc phosphate primer finish for use as an internal flow coating for pipelines.
A two component polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.
A two component, solvent free, amine cured epoxy coating for use as a chemical resistant, surface tolerant tank lining.
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.