£9.95 delivery on orders excluding certain products & postcodes *
A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating with a selected blend of fused aluminium oxide.
Formulated for professional use in offices, schools, colleges and universities, to turn a wall into a dry-wipe creative space.
A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.
A high spec, 2 pack, anti corrosion intermediate MIO coat for steel structures at risk from severe abrasion.
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.
A two pack topcoat especially for objects exposed to heavy abrasion and chemical attack.
A tank lining designed to amplify cargo opportunities and reduce installation costs.
A solvent based high performance sealer which is suitable for heavily trafficked areas.
A water based cure and seal for improving the abrasion resistance of all forms of freshly laid or existing concrete.
An eco-friendly water-based Tarmac Binder for use on Macadam Tennis Courts.
Solvent based primer and topcoat for ultimate corrosion protection in low temperatures.
Specifically developed line marking paint as a fast drying line marking coating for concrete surfaces with minimum disruption.
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.
A clear surface coating, available in a matt and gloss finish, offering excellent protection against graffiti and poster vandalism.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
A two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.
A two-component epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.
A high quality enamel for use at temperatures up to 600°C indirect heat.
A matt, transparent sealer for use as a slip resistant topcoat for Remmers synthetic floor coatings.
A transparent priming and mortar resin floor primer for use within the Remmers OS 8 System.
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.
Designed to withstand heats of up to 425°C in sheltered or interior environments.
A quick drying matt finish paint for Squash Court Surroundings and all non playing surfaces.