Full Product Catalogue

A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A clear polyurethane coating which provides resistance against graffiti for walls and ceilings.

A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

A high solids epoxy tank lining with exceptional chemical resistance. Formulated primarily as a tank lining.

A two pack corrosion resistant metal primer formulated as a weldable pre-construction primer or field or shop applied primer.

Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.

A non-skid coating for steel decks and concrete in corrosive environments.

A self-priming pure epoxy paint which cures to a corrosion resistant coating.

A highly protective water-based varnish for wooden floors exposed to high pedestrian traffic.

A two pack epoxy primer/finish offering corrosion protection in one coat.

Provides rapid cure and overcoating even under low temperature conditions.

A two pack, tar free, modified epoxy tie coat.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A two component primer which is ideal for speeding up production and throughput.

An epoxy primer which provides optimised control where thin film application is required.

A fast curing epoxy primer for use with International 3200 product series.

A pure epoxy primer with anti-corrosive properties and overcoating intervals of up to 6 months.

A water-borne coating used to create aesthetically demanding surfaces of exceptional quality.

A two pack polyamine cured phenolic / novolac epoxy coating that is specially formulated for tank lining.

A two component protective coating for use in high traffic, atmospheric and immersed environments.