Full Product Catalogue

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

Anti corrosion system designed to withstand severe conditions and high temperatures up to 600° C.

A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.

Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

A two pack corrosion resistant metal primer formulated as a weldable pre-construction primer or field or shop applied primer.

A two pack, high solid aluminium pigmented, low temperature curing modified epoxy mastic.

Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.

Intended to provide high corrosion protection, with a rapid cure in a single coat scheme.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A 2K high build epoxy primer containing anticorrosive pigments.

An exterior scrim free intumescent coating for up to 120 minutes fire protection.

A solvent free, high build, two pack polyurethane mastic for steel, for the repair of pipe coatings and the coating of field joints.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.