£7.75 delivery on orders excluding certain products & postcodes *
Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces
Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.
A two component flint reinforced solvent free polyamine cured, epoxy compound suitable for the protection of steel and concrete.
A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating with a selected blend of fused aluminium oxide.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
A one pack coating that contains 96% zinc to provide cold galvanizing cathodic protection of ferrous metals.
A 2 part surface tolerant high solid glass flake epoxy coating primarily designed for use in offshore splash zone maintenance.
This product is now discontinued. See Sherwin Williams Zinc Clad IV EU as a potential alternative.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A flake filled MIO amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.
A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.
A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.
A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.
A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.
A water based, quick drying gloss acrylic finish or sealercoat for Sherwin Williams FX Firetex intumescent product range.
A 3 pack epoxy high build anti slip deck coating, approved for MoD. UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134.