NORSOK Approved Paints

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.

A self-priming, two-component, high-build, pure epoxy paint.

A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.

A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.

A 2 pack structural steel and piping coating that will continue to cure while immersed.

Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A two component multipurpose polyamide anti-corrosive epoxy paint system from PPG.

A two component multi purpose polyamide cured anti-corrosive epoxy paint system from PPG.

A hard wearing, anti slip extra heavy duty deck coating system. Reaches NORSOK M-501 and BS.476 Part 7: Surface spread of flames

A two component, anti-corrosive metallic zinc rich epoxy primer.

A low VOC, high solids, high build, two component epoxy coating.

Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

A versatile primer for long-term protection of steel in severely corrosive environments.

For long-term protection of hot pipework, equipment and other hot surfaces.

A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.

Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A 3 pack epoxy high build anti slip deck coating, approved for MoD. UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134.

A two component, high build, amine adduct cured, phenolic epoxy holding primer.

A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.