£7.75 delivery on orders excluding certain products & postcodes *
Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.
A two component protective coating for use in high traffic, atmospheric and immersed environments.
A two component multipurpose polyamide anti-corrosive epoxy paint system from PPG.
A two component multi purpose polyamide cured anti-corrosive epoxy paint system from PPG.
A hard wearing, anti slip extra heavy duty deck coating system. Reaches NORSOK M-501 and BS.476 Part 7: Surface spread of flames
A 3 pack epoxy high build anti slip deck coating, approved for MoD. UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134.
Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.
Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.
A two component protective coating for use in high traffic, atmospheric and immersed environments.
A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.
A versatile primer for long-term protection of steel in severely corrosive environments.
For long-term protection of hot pipework, equipment and other hot surfaces.
A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.
Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.
A two component, high build, amine adduct cured, phenolic epoxy holding primer.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.
A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.
A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
A 2 pack structural steel and piping coating that will continue to cure while immersed.
A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.