£7.75 delivery on orders excluding certain products & postcodes *
Promain supply a high quality range of heavy duty industrial floor paints and coatings that are suitable for heavy commercial, industrial, and if needed, domestic use. These heavy duty coatings are used when painting warehouses, showrooms, corridors, car parks, store rooms, factory units, cold stores, garages, boiler rooms, as well as heavy traffic areas and clean room applications in the health and food industry.
The industrial floor paints and heavy duty coatings that Promain offer are industry leading products. We will only ever put our name to something that can stand the test of time, which is why we bring you such highly sought after products. We understand how important it is for you to be able to trust that your products are going to be completely effective. Because of this, we have brought you industrial floor paints from top brand names like PPG, Rustoleum, Sika, Blackfriar, Coo-Var, Remmers, Centrecoat and Jotun.
Two-component water-based epoxy coating with a shiny finish, for concrete floors and cementitious substrates, to provide an anti-dust, oil resistant f...
Formerly Sikafloor 264. A two part, economic, coloured industrial epoxy resin floor paint for maintenance workshops, garages and loading ramps.
A high volume solids, 2 pack catalysed epoxy, capable of being applied up to 3000 microns DFT on marine decks.
A seamless, medium duty epoxy floor topping for use on concrete and polymer modified cementitious screeds.
A 2 part, solvent free, self levelling coating for floors such as mechanically loaded surfaces subject to foot and vehicle traffic.
A matt, transparent sealer for use as a slip resistant topcoat for Remmers synthetic floor coatings.
Formerly Spencer Coatings. A two pack epoxy, solvent free clear primer / sealer for concrete floors.
A 2 pack, heavy duty floor paint for garages, workshops and warehouses. FeRFA Type 3 System.
A 2 part epoxy, high build, slightly textured, fast curing floor coating and seal coat. Ideal for workshops and garages.
A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating with a selected blend of fused aluminium oxide.
A two component, PUR matt, coloured seal coat which is designed to provide a finishing coat as part of the ComfortFloor flooring systems.
An epoxy novolac coating designed to provide protection to concrete and steel structures in aggressive chemical conditions.
A water based solvent free heavy duty two pack epoxy floor coating for wood, concrete, masonry, asphalt and tarmac.
A high performance epoxy system for application at temperatures down to 0°C.
A solvent free low odour floor paint. An exceptionally hard wearing coating for heavy duty use.
A high performance, low VOC, water borne two component epoxy with a high gloss finish for use on structural steel and concrete floors.
A transparent priming and mortar resin floor primer for use within the Remmers OS 8 System.
A two part epoxy self-smoothing and broadcast system for concrete and cement screeds in areas of normal to medium heavy traffic.
A two component, PUR tough elastic coloured seal coat for industrial flooring such as car park decks, ramps or warehouses.
A 3 component, solvent free, self leveling epoxy floor coating suitable for industrial areas with heavy traffic on to concrete.
A three pack methacrylate resin system, modified to impart toughness, resilience and waterproofing properties to the cured membrane.
A very fast curing fire resistant and slip resistant coating offering a full return to service after just 2 hours.
A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.
A solvent free coating designed for installation onto steel or concrete surfaces.